Service Manual

ISB, ISBe and QSB (Common Rail [...] Lubricating Oil Filter Head Adapter
Section 7 - Lubricating Oil System - Group 07 Page 7-19
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Inspect the sealing surfaces for signs of leakage or burrs.
Use a fine crocus cloth to remove burrs.
Install
NOTE: Use new o-rings and seal rings when installing the
filter head adapter.
Install a new o-ring in the groove on the underside of the
filter head cover.
Install a small o-ring in the groove on the other side of the
filter head cover.
Lubricate the o-rings with clean 15W-40 engine oil or
Lubriplate™ multi-purpose lubricant.
Install a new o-ring in the groove of the center hose
connector.
Lubricate the o-rings with clean 15W-40 engine oil or
Lubriplate™ multi-purpose lubricant.
Install the outer hose connector, on the oil filter adapter, to
the rear of the engine and align the marks made before
removal.
Push the center connector through the adapter and install
the filter head adapter to the engine.
Tighten the center connector while keeping the markings
made before the removal step aligned.
Torque Value: 100 N•m [ 74 ft-lb ]