Service Manual

Lubricating Oil Pump ISB, ISBe and QSB (Common Rail [...]
Page 7-36 Section 7 - Lubricating Oil System - Group 07
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
WARNING
Batteries can emit explosive gases. To reduce the
possibility of personal injury, always ventilate the
compartment before servicing the batteries. To
reduce the possibility of arcing, remove the negative
(-) battery cable first and attach the negative (-)
battery cable last.
Connect batteries.
Operate the engine and check for leaks.
Install the front gear cover. Refer to Procedure Procedure
001-031
Install the crankshaft speed indicator ring. Refer to
Procedure Procedure 001-071
Install the vibration damper. Refer to Procedure
Procedure 001-051 or Refer to Procedure Procedure
001-052
Install the crankshaft position sensor. Refer to Procedure
Procedure 019-365 in Troubleshooting and Repair
Manual, CM850 Electronic Control System, ISB Engines,
Bulletin 4021337.
Install the fan hub. Refer to Procedure Procedure 008-039
Install the water pump drive belt. Refer to Procedure
Procedure 008-002
Install the seawater pump drive belt. Refer to Procedure
Procedure 008-126
Install the belt guards. Refer to Procedure Procedure
008-001