Manualshelf

Service Manual

ManualsBrandsCummins ManualsOtherPart 2 ISB and OSB (Common Rall Fuel system) Service manual
231232233234235236237238239240
ISB, ISBe and QSB (Common Rail [...] Belt Guard
Section 8 - Cooling System - Group 08 Page 8-3
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Belt Guard (008-001)
Remove
Remove the two wing nuts (A) and three capscrews (B)
on the sea water pump belt guard.
Remove the upper belt guard.
Remove the three wing nuts on the alternator/engine
water pump belt guard.
Remove the lower belt guard.
Remove the five rubber isolators from the upper and lower
belt guard mounting studs.
NOTE: Two of the studs are attached with nuts from the
rear side of the gear housing.
Remove the locknut, if applicable.
Remove the stud.