Service Manual

ISB, ISBe and QSB (Common Rail [...] Fan Hub, Belt Driven
Section 8 - Cooling System - Group 08 Page 8-61
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Install
Install the fan hub.
Torque Value: 33 N•m [ 24 ft-lb ]
Install the hub with four mounting capscrews.
Torque Value: 33 N•m [ 24 ft-lb ]
Install the fan hub pulley with the six mounting capscrews.
Torque Value: 12 N•m [ 106 in-lb ]
Finishing Steps
WARNING
Batteries can emit explosive gases. To reduce the
possibility of personal injury, always ventilate the
compartment before servicing the batteries. To
reduce the possibility of arcing, remove the negative
(-) battery cable first and attach the negative (-)
battery cable last.
• Install the fan spacer and pulley. Refer to Procedure
008-039 (Fan Spacer and Pulley) in Section 8.
• Install the cooling fan drive belt. Refer to Procedure
008-002 (Drive Belt, Cooling Fan) in Section 8.
• Connect the batteries. Refer to Procedure 013-009
(Battery Cables and Connections) in Section 13.
• Operate the engine and check for proper operation.