Service Manual

Fan Shroud Assembly ISB, ISBe and QSB (Common Rail [...]
Page 8-62 Section 8 - Cooling System - Group 08
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
WARNING
Batteries can emit explosive gases. To reduce the
possibility of personal injury, always ventilate the
compartment before servicing the batteries. To
reduce the possibility of arcing, remove the negative
(-) battery cable first and attach the negative (-)
battery cable last.
• Install the drive belt, cooling fan. Refer to Procedure
008-002 (Drive Belt, Cooling Fan) in Section 8.
• Install the drive belt, seawater pump. Refer to
Procedure 008-126 (Drive Belt, Seawater Pump) in
Section 8.
• Install the belt guards. Refer to Procedure 008-001
(Belt Guard) in Section 8.
• Connect the batteries. Refer to Procedure 013-009
(Battery Cables and Connections) in Section 13.
• Operate the engine and check for proper operation.
Fan Shroud Assembly (008-038)
Remove
To remove the fan shroud, refer to the original equipment
manufacturer's manual.
Inspect for Reuse
Inspect the fan shroud for proper fan clearance.
Check the fan shroud for cracks, air leaks, or damage.