Service Manual

Expansion Tank ISB, ISBe and QSB (Common Rail [...]
Page 8-80 Section 8 - Cooling System - Group 08
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Install the coolant make-up hose and clamps to the
expansion tank and coolant transfer tube.
Tighten the hose clamps.
Torque Value: 8 N•m [ 70 in-lb ]
Finishing Steps
WARNING
Coolant is toxic. Keep away from children and pets. If
not reused, dispose of in accordance with local
environmental regulations.
• Connect the engine coolant level sensor connector.
Refer to Procedure 019-017 in Troubleshooting and
Repair Manual, CM850 Electronic Control System,
Bulletin 4021416.
• Fill the cooling system. Refer to Procedure 008-018
• Connect the batteries. Refer to Procedure 013-009
Operate the engine and check for leaks.