Service Manual

Water Pump ISB, ISBe and QSB (Common Rail [...]
Page 8-94 Section 8 - Cooling System - Group 08
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Install
CAUTION
Do not use thread sealant or Teflon™ tape on the zinc
anodes. Use of any type of Thread sealant will
insulate the zinc anode and prevent a good ground.
Install the zinc anode plugs in the aftercooler assembly.
Torque Value: 45 N•m [ 35 ft-lb ]
Install the zinc anode plug in the bottom of the heat
exchanger.
Torque Value: 45 N•m [ 35 ft-lb ]
Open the sea water supply valve(s).
Operate the engine and check for leaks.
Water Pump (008-062)
General Information
The water pump is a belt-driven, centrifugal-type pump
with the inlet and bypass as integral parts of the cylinder
block.
NOTE: It is not practical to replace the components of the
water pump; the water pump is serviced as an assembly.