Service Manual

Water Pump ISB, ISBe and QSB (Common Rail [...]
Page 8-98 Section 8 - Cooling System - Group 08
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Install
Install a new sealing ring into the water pump groove.
Install the water pump and mounting capscrews.
Tighten the capscrews.
Torque Value:
9.8 Grade 24 N•m [ 212 in-lb ]
Torque Value:
10.9 Grade 30 N•m [ 22 ft-lb ]
Finishing Steps
Automotive and Industrial
WARNING
Batteries can emit explosive gases. To reduce the
possibility of personal injury, always ventilate the
compartment before servicing the batteries. To
reduce the possibility of arcing, remove the negative
(-) battery cable first and attach the negative (-)
battery cable last.
WARNING
Coolant is toxic. Keep away from children and pets. If
not reused, dispose of in accordance with local
environmental regulations.
• Install the cooling fan drive belt. Refer to Procedure
008-002 in Section 8.
• Fill the cooling system. Refer to Procedure 008-018 in
Section 8.
• Connect the batteries. Refer to the OEM service
manual.
• Operate the engine until it reaches a temperature of
88°C [190°F].
• Check for coolant leaks.