Service Manual

Sea Water Pump Pulley ISB, ISBe and QSB (Common Rail [...]
Page 8-126 Section 8 - Cooling System - Group 08
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Clean and Inspect for Reuse
WARNING
When using solvents, acids, or alkaline materials for
cleaning, follow the manufacturer's recommendations
for use. Wear goggles and protective clothing to
reduce the possibility of personal injury.
WARNING
Some solvents are flammable and toxic. Read the
manufacturer's instructions before using.
WARNING
Wear appropriate eye and face protection when using
compressed air. Flying debris and dirt can cause
personal injury.
Use solvent to clean the pulley.
Dry with compressed air.
Inspect the pulley for cracks or other damage.
If the pulley is cracked or damaged, it must be replaced.
Install
Install the sea water pump pulley using four mounting
capscrews.
Tighten the capscrews.
Torque Value: 10 N•m [ 89 in-lb ]