Service Manual

ISB, ISBe and QSB (Common Rail [...] Hydraulic Pump Drive
Section 9 - Drive Units - Group 09 Page 9-9
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Connect all hydraulic lines to the pump.
Tighten mounting capscrews.
Torque Value: 62 N•m [ 46 ft-lb ]
Finishing Steps
• Install the pulley onto the hydraulic pump shaft and
retaining capscrews.
Torque Value: 33 N•m [ 288 in-lb ]
• Install the drive belt. Refer to Procedure 008-126 in
Section 8.
• Remove the hydraulic line connection covers.
• Connect the hydraulic line (1) and hose (2) to the
pump.
Torque Value:
Hose Sleeve Nut
Step 1 27 N•m [ 239 in-lb ]
Torque Value:
Hose Clamp
Step 1 6 N•m [ 50 in-lb ]
• Operate the engine and check for leaks.