Service Manual

ISB, ISBe and QSB (Common Rail [...] Refrigerant Compressor Mounting Bracket
Section 9 - Drive Units - Group 09 Page 9-31
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Clean and Inspect for Reuse
WARNING
When using a steam cleaner, wear safety glasses or a
face shield, as well as protective clothing. Hot steam
can cause serious personal injury.
WARNING
When using solvents, acids, or alkaline materials for
cleaning, follow the manufacturer's recommendations
for use. Wear goggles and protective clothing to
reduce the possibility of personal injury.
WARNING
Wear appropriate eye and face protection when using
compressed air. Flying debris and dirt can cause
personal injury.
Use steam or solvent to clean the refrigerant compressor
mounting brackets.
Dry with compressed air.
Inspect the refrigerant compressor mounting brackets for
cracks or damage.
If cracks are found on the refrigerant compressor
mounting brackets, they must be replaced.
Install
Install the refrigerant compressor mounting bracket and
bracket mounting capscrews.
Torque Value: 46 N•m [ 34 ft-lb ]
NOTE: Due to the availability of different bracket
configurations, this procedure is meant to be generic.
Note any knife edges or alignment pins on the bracket
that need to be used and make sure the mating or
alignment features are free from debris.