Service Manual

Air Inlet Connection ISB, ISBe and QSB (Common Rail [...]
Page 10-14 Section 10 - Air Intake System - Group 10
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Clean and Inspect for Reuse
WARNING
When using solvents, acids, or alkaline materials for
cleaning, follow the manufacturer's recommendations
for use. Wear goggles and protective clothing to
reduce the possibility of personal injury.
WARNING
Use skin and eye protection when handling caustic
solutions to reduce the possibility of personal injury.
WARNING
Wear appropriate eye and face protection when using
compressed air. Flying debris and dirt can cause
personal injury.
Clean the piping and connections with solvent or hot
soapy water and dry with compressed air.
Check the piping and connections for cracks, holes, and
worn sections.
If any damage found, replace the damaged components.
Install
Install the air inlet piping and connections.
Tighten the attaching clamps. Refer to OEM
specifications.
Finishing Steps
Operate the engine and check for leaks.