Service Manual

Air Intake Manifold Cover ISB, ISBe and QSB (Common Rail [...]
Page 10-74 Section 10 - Air Intake System - Group 10
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Air Intake Manifold Cover (010-108)
Preparatory Steps
• Remove the air intake connection. Refer to Procedure
010-080
• Remove the injector supply lines. Refer to Procedure
006-051
• Remove the fuel rail. Refer to Procedure 006-060
Remove
Remove the mounting capscrews and the intake cover.
Tape off the intake manifold opening to prevent debris
from entering the intake system.
NOTE: Be sure not to tape over all manifold edges so
that the surface can be cleaned.
Clean and Inspect for Reuse
NOTE: Keep the gasket material and any other material
out of the air intake.
Clean the sealing surfaces (1 and 2) with a putty knife and
a clean rag.
Inspect the intake manifold cover for cracks or other
damage.