Service Manual

Air Intake Connection Adapter ISB, ISBe and QSB (Common Rail [...]
Page 10-78 Section 10 - Air Intake System - Group 10
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Remove the charge air piping between the air intake
connection adapter and the outlet of the charge air cooler.
Refer to Procedure Procedure 010-019
Remove
Remove the v-band clamp, the elbow piece of the air
intake connection adapter, and the seal.
Remove the three capscrews that hold the straight piece
of the air intake connection adapter to the air intake
connection, and remove the seal.
NOTE: On engines equipped with air compressors,
remove the air compressor intake line from the adapter.
Service Tip: On engines equipped with EGR, the air
intake connection adapter holds the EGR mixer in place.