Service Manual

ISB, ISBe and QSB (Common Rail [...] Exhaust Outlet Connection
Section 11 - Exhaust System - Group 11 Page 11-13
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Remove the sealing grommet from the exhaust elbow and
inspect for damage.
Replace the grommet if damaged.
Inspect the exhaust elbow for pitting or corrosion.
Inspect the exhaust tube for cracks and other damage to
the lamination.
Install
Install a new gasket and the exhaust outlet connection to
the turbocharger.
Tighten the four mounting capscrews.
Torque Value: 24 N•m [ 212 in-lb ]
Install the hose on the heat exchanger and the exhaust
outlet connection. Tighten the hose clamps.
Torque Value: 24 N•m [ 212 in-lb ]
Lightly coat the exhaust o-ring with grease or lubricant to
reduce the possibility of o-ring damage.
Install the exhaust o-ring into the groove of the pod
exhaust flange.