Service Manual

EGR Valve ISB, ISBe and QSB (Common Rail [...]
Page 11-22 Section 11 - Exhaust System - Group 11
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Inspect the V-band clamps for signs of overextension. The
band must not be bent or damaged.
Inspect the V-band clamp threads for damage.
Replace the V-band clamp if damage is found.
Install
Before installing the V-band clamp, coat the clamping
surface with high temperature anti-seize compound.
Position the V-band clamp and new gasket onto the
exhaust transfer tube.
Position the EGR valve and new mounting gasket.
Hold the EGR valve and gasket in place with the four
mounting capscrews. Do not tighten the capscrews at this
time.