Service Manual

ISB, ISBe and QSB (Common Rail [...] EGR Valve Coolant Lines
Section 11 - Exhaust System - Group 11 Page 11-29
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Remove
NOTE: All lines and banjo screws used in the water
plumbing have increased annulus ports. Do not use
standard lines or banjo screws as a substitute.
Remove the supply and return coolant lines for the EGR
valve actuator.
Discard the banjo seals.
Inspect for Reuse
Inspect the lines for debris, clogging and pinched areas.
Inspect the banjo fittings for damage.
Install
NOTE: All lines and banjo screws used in the water
plumbing have increased annulus ports. Do not use
standard lines or banjo screws as a substitute.
Install the supply and return lines using new banjo seals.
Tighten the fittings.
Torque Value:
10-mm Banjo
Step 1 15 N•m [ 133 in-lb ]
Torque Value:
Vent Fitting Banjo
Step 1 15 N•m [ 133 in-lb ]