Service Manual

EGR Cooler Coolant Lines ISB, ISBe and QSB (Common Rail [...]
Page 11-30 Section 11 - Exhaust System - Group 11
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Finishing Steps
• Fill the engine cooling system. Refer to Procedure
008-018
EGR Cooler Coolant Lines (011-031)
Preparatory Steps
Drain the coolant. Refer to Procedure 008-018
Remove
Remove the nut holding the steel coolant inlet tube
bracket to the exhaust manifold.
Remove the clamps and hoses from each end and
remove the coolant inlet tube.