Service Manual

ISB, ISBe and QSB (Common Rail [...] Alternator Bracket
Section 13 - Electrical Equipment - Group 13 Page 13-13
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Marine Applications
WARNING
Batteries can emit explosive gases. To reduce the
possibility of personal injury, always ventilate the
compartment before servicing the batteries. To avoid
arcing, remove the negative (-) battery cable first and
attach the negative (-) battery cable last.
WARNING
Acid is extremely dangerous and can damage the
machinery and can also cause serious burns. Always
provide a tank of strong soda water as a neutralizing
agent when servicing the batteries. Wear goggles and
protective clothing to reduce the possibility of serious
personal injury.
• Connect all wires to the alternator.
• Install the water pump (cooling fan) drive belt. Refer to
Procedure 008-002 in Section 8.
• Install the belt guards. Refer to Procedure 008-001 in
Section 8.
• Connect the battery ground cable. Refer to Procedure
013-009 in Section 13.
• Operate the engine and check for proper operation.
Alternator Bracket (013-003)
Initial Check
Check that the alternator pulley is in line with the other
belt driven pulleys. Use Pulley Alignment Fixture, Part
Number 3163524, to check the alignment.
If alternator pulley is out of alignment, verify that the
correct alternator brackets have been used and/or have
been installed correctly
Preparatory Steps
Automotive and Industrial
WARNING
Batteries can emit explosive gases. To reduce the
possibility of personal injury, always ventilate the
compartment before servicing the batteries. To
reduce the possibility of arcing, remove the negative
(-) battery cable first and attach the negative (-)
battery cable last.
Disconnect the batteries.