Service Manual

ISB, ISBe and QSB (Common Rail [...] Alternator Bracket
Section 13 - Electrical Equipment - Group 13 Page 13-17
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Marine Applications
NOTE: The coolant connection tube has two dowel pins
used for correctly locating the alternator mounting bracket
during installation.
Install the alternator mounting bracket over the two dowel
pins.
Install the two alternator bracket mounting capscrews and
tighten.
Torque Value: 54 N•m [ 40 ft-lb ]
Finishing Steps
Automotive and Industrial
Install the alternator. Refer to Procedure 013-001.
Install the drive belt. Refer to Procedure 008-002.
WARNING
Batteries can emit explosive gases. To reduce the
possibility of personal injury, always ventilate the
compartment before servicing the batteries. To
reduce the possibility of arcing, remove the negative
(-) battery cable first and attach the negative (-)
battery cable last.
Connect the batteries.
Marine Applications
WARNING
Batteries can emit explosive gases. To reduce the
possibility of personal injury, always ventilate the
compartment before servicing the batteries. To
reduce the possibility of arcing, remove the negative
(-) battery cable first and attach the negative (-)
battery cable last.
Install the alternator. Refer to Procedure 013-001.
Install the water pump (cooling fan) drive belt. Refer to
Procedure 008-002
Install the belt guard. Refer to Procedure 008-001.
Connect the battery. Refer to Procedure 013-009.