Manualshelf

Service Manual

ManualsBrandsCummins ManualsOtherPart 2 ISB and OSB (Common Rall Fuel system) Service manual
631632633634635636637638639640
Engine Testing (Chassis Dynamometer) ISB, ISBe and QSB (Common Rail [...]
Page 14-8 Section 14 - Engine Testing - Group 14
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
To correctly monitor an engine's performance, record the following parameters:
• Lubricating oil pressure (vehicle instrument panel)
• Engine speed (rpm) (vehicle instrument panel)
• Wheel horsepower (whp) (dynamometer controls)
• Blowby: Refer to Procedure 014-010 in Section 14.
• Exhaust back pressure:
• Use the following procedure in the Service Manual, ISF2.8 CM2220 F101, Bulletin 4310846. Refer to Procedure 011-009 in Section 14.
• Use the following procedure in the Service Manual, ISF2.8 CM2220 E and ISF2.8 CM2220 AN Bulletin 4022178. Refer to Procedure 011-009 in Section 11.
• Use the following procedure in the Service Manual, ISF3.8 CM2220 Bulletin 4021704. Refer to Procedure 011-009 in Section 11.
• Use the following procedure in the Troubleshooting and Repair Manual, ISB and QSB5.9 Engines, Bulletin 3666193. Refer to Procedure 011-009 in Section 11.
• Use the following procedure in the Troubleshooting and Repair Manual, B3.9, B4.5, and B5.9 Series Engines, Bulletin 3666087. Refer to Procedure 011-009 in
Section 11.
• Use the following procedure in the Troubleshooting and Repair Manual, ISC, ISCe, QSC8.3, ISL and QSL9 Engines, Bulletin 4021418. Refer to Procedure
011-009 in Section 11.
• Use the following procedure in the Troubleshooting and Repair Manual, C Series, Bulletin 3666003. Refer to Procedure 011-009 in Section 11.
• Use the following procedure in the Troubleshooting and Repair Manual, ISB, ISBe 4 and 6 Cylinder, Bulletin 4021271. Refer to Procedure 011-009 in Section 11.
• Use the following procedure in the Troubleshooting and Repair Manual, B Series, Bulletin 3810207. Refer to Procedure 011-009 in Section 11.
• Use the following procedure in the QSL9 CM2350 L102 Service Manual, Bulletin 4332796. Refer to Procedure 011-009 in Section 11.
• Coolant temperature (vehicle instrument panel):
• Use the following procedure in the Service Manual, ISF2.8 CM2220 F101, Bulletin 4310846. Refer to Procedure 008-018 in Section 18.
• Use the following procedure in the Service Manual, ISF2.8 CM2220 E and ISF2.8 CM2220 AN Bulletin 4022178. Refer to Procedure 008-018 in Section 8.
• Use the following procedure in the Service Manual, ISF3.8 CM2220 Bulletin 4021704. Refer to Procedure 008-018 in Section 8.
• Use the following procedure in the Troubleshooting and Repair Manual, ISB and QSB5.9 Engines, Bulletin 3666193. Refer to Procedure 008-018 in Section 8.
• Use the following procedure in the Troubleshooting and Repair Manual, ISB and QSB5.9 Engines, Bulletin 3666193. Refer to Procedure 008-018 in Section 8.
• Use the following procedure in the Troubleshooting and Repair Manual, B3.9, B4.5, and B5.9 Series Engines, Bulletin 3666087. Refer to Procedure 008-018 in
Section 8.
• Use the following procedure in the Troubleshooting and Repair Manual, ISC, ISCe, QSC8.3, ISL and QSL9 Engines, Bulletin 4021418. Refer to Procedure
008-018 in Section 8.
• Use the following procedure in the Troubleshooting and Repair Manual, C Series, Bulletin 3666003. Refer to Procedure 008-018 in Section 8.
• Use the following procedure in the Troubleshooting and Repair Manual, ISB, ISBe 4 and 6 Cylinder, Bulletin 4021271. Refer to Procedure 008-018 in Section 8.
• Use the following procedure in the Troubleshooting and Repair Manual, B Series, Bulletin 3810207. Refer to Procedure 008-018 in Section 8.
• Use the following procedure in the QSL9 CM2350 L102 Service Manual, Bulletin 4332796. Refer to Procedure 008-018 in Section 8.
• Coolant pressure:
• Use the following procedure in the Service Manual, ISF2.8 CM2220 F101, Bulletin 4310846. Refer to Procedure 008-018 in Section 8.
• Use the following procedure in the Service Manual, ISF2.8 CM2220 E and ISF2.8 CM2220 AN Bulletin 4022178. Refer to Procedure 008-018 in Section 8.
• Use the following procedure in the Troubleshooting and Repair Manual, ISB and QSB5.9 Engines, Bulletin 3666193. Refer to Procedure 008-018 in Section 8.
• Use the following procedure in the Troubleshooting and Repair Manual, B3.9, B4.5, and B5.9 Series Engines, Bulletin 3666087. Refer to Procedure 008-018 in
Section 8.
• Use the following procedure in the Troubleshooting and Repair Manual, ISC, ISCe, QSC8.3, ISL and QSL9 Engines, Bulletin 4021418. Refer to Procedure
008-018 in Section 8.
• Use the following procedure in the Troubleshooting and Repair Manual, C Series, Bulletin 3666003. Refer to Procedure 008-018 in Section 8.
• Use the following procedure in the Troubleshooting and Repair Manual, ISB, ISBe 4 and 6 Cylinder, Bulletin 4021271. Refer to Procedure 008-018 in Section 8.
• Use the following procedure in the Troubleshooting and Repair Manual, B Series, Bulletin 3810207. Refer to Procedure 008-018 in Section 8.
• Use the following procedure in the QSL9 CM2350 L102 Service Manual, Bulletin 4332796. Refer to Procedure 008-018 in Section 8.
• Intake manifold pressure:
• Use the following procedure in the Service Manual, ISF2.8 CM2220 F101, Bulletin 4310846. Refer to Procedure 019-159 in Section 19.
• Use the following procedure in the Service Manual, ISF2.8 CM2220 E and ISF2.8 CM2220 AN Bulletin 4022178. Refer to Procedure 010-031 in Section 10.
• Use the following procedure in the Service Manual, ISF3.8 CM2220 Bulletin 4021704. Refer to Procedure 010-057 in Section 10.
• Use the following procedure in the Troubleshooting and Repair Manual, ISB and QSB5.9 Engines, Bulletin 3666193. Refer to Procedure 010-057 in Section 10.
• Use the following procedure in the Troubleshooting and Repair Manual, B3.9, B4.5, and B5.9 Series Engines, Bulletin 3666087. Refer to Procedure 010-057 in
Section 10.
• Use the following procedure in the Troubleshooting and Repair Manual, ISC, ISCe, QSC8.3, ISL and QSL9 Engines, Bulletin 4021418. Refer to Procedure
010-057 in Section 10.
• Use the following procedure in the Troubleshooting and Repair Manual, C Series, Bulletin 3666003. Refer to Procedure 010-057 in Section 10.
• Use the following procedure in the Troubleshooting and Repair Manual, ISB, ISBe 4 and 6 Cylinder, Bulletin 4021271. Refer to Procedure 010-057 in Section 10.
• Use the following procedure in the Troubleshooting and Repair Manual, B Series, Bulletin 3810207. Refer to Procedure 010-057 in Section 10.
• Inlet air restriction:
• Use the following procedure in the Service Manual, ISF2.8 CM2220 F101, Bulletin 4310846. Refer to Procedure 010-031 in Section 10.
• Use the following procedure in the Service Manual, ISF2.8 CM2220 E and ISF2.8 CM2220 AN Bulletin 4022178. Refer to Procedure 010-031 in Section 10.
• Use the following procedure in the Service Manual, ISF3.8 CM2220 Bulletin 4021704. Refer to Procedure 010-031 in Section 10.
• Use the following procedure in the Troubleshooting and Repair Manual, ISB and QSB5.9 Engines, Bulletin 3666193. Refer to Procedure 010-031 in Section 10.
• Use the following procedure in the Troubleshooting and Repair Manual, B3.9, B4.5, and B5.9 Series Engines, Bulletin 3666087. Refer to Procedure 010-031 in
Section 10.
• Use the following procedure in the Troubleshooting and Repair Manual, ISC, ISCe, QSC8.3, ISL and QSL9 Engines, Bulletin 4021418. Refer to Procedure
010-031 in Section 10.
• Use the following procedure in the Troubleshooting and Repair Manual, C Series, Bulletin 3666003. Refer to Procedure 010-031 in Section 10.
• Use the following procedure in the Troubleshooting and Repair Manual, ISB, ISBe 4 and 6 Cylinder, Bulletin 4021271. Refer to Procedure 010-031 in Section 10.
• Use the following procedure in the Troubleshooting and Repair Manual, B Series, Bulletin 3810207. Refer to Procedure 010-031 in Section 10.
• Use the following procedure in the QSL9 CM2350 L102 Service Manual, Bulletin 4332796. Refer to Procedure 010-031 in Section 10.
• Fuel supply pressure:
• Use the following procedure in the Service Manual, ISF2.8 CM2220 F101, Bulletin 4310846. Refer to Procedure 006-051 in Section 6.
• Use the following procedure in the Service Manual, ISF2.8 CM2220 E and ISF2.8 CM2220 AN Bulletin 4022178. Refer to Procedure 005-016 in Section 5.
• Use the following procedure in the Service Manual, ISF3.8 CM2220 Bulletin 4021704. Refer to Procedure 006-024 in Section 6.
• Use the following procedure in the Troubleshooting and Repair Manual, ISB and QSB5.9 Engines, Bulletin 3666193. Refer to Procedure 006-024 in Section 6.
• Use the following procedure in the Troubleshooting and Repair Manual, B3.9, B4.5, and B5.9 Series Engines, Bulletin 3666087. Refer to Procedure 006-024 in
Section 6.
• Use the following procedure in the Troubleshooting and Repair Manual, ISC, ISCe, QSC8.3, ISL and QSL9 Engines, Bulletin 4021418. Refer to Procedure
006-024 in Section 6.
• Use the following procedure in the Troubleshooting and Repair Manual, C Series, Bulletin 3666003. Refer to Procedure 006-024 in Section 6.
• Use the following procedure in the Troubleshooting and Repair Manual, ISB, ISBe 4 and 6 Cylinder, Bulletin 4021271. Refer to Procedure 006-024 in Section 6.
• Use the following procedure in the Troubleshooting and Repair Manual, B Series, Bulletin 3810207. Refer to Procedure 006-024 in Section 6.
• Use the following procedure in the QSL9 CM2350 L102 Service Manual, Bulletin 4332796. Refer to Procedure 006-024 in Section 6.