Service Manual

Crankcase Blowby, Measure ISB, ISBe and QSB (Common Rail [...]
Page 14-50 Section 14 - Engine Testing - Group 14
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Valve stem clearance is excessive or the valve stem seals are damaged.
• Use the following procedure in the C Series Engines Troubleshooting and
Repair Manual, Bulletin 3666003. Refer to Procedure 002-004 in Section
2.
• Use the following procedure in the B3.9, B4.5, B4.5 RGT, and B5.9
Service Manual, Bulletin 3666087. Refer to Procedure 002-004 in Section
2.
• Use the following procedure in the ISB and QSB5.9-44 Engines
Troubleshooting and Repair Manual, Bulletin 3666193. Refer to Procedure
002-004 in Section 2.
• Use the following procedure in the ISBe, ISB, and QSB (Common Rail
Fuel System) Service Manual, Bulletin 4021271. Refer to Procedure
002-004 in Section 2.
• Use the following procedure in the Industrial QSB3.9-30, QSB4.5-30, and
QSB5.9-30 Series Engines Troubleshooting and Repair Manual, Bulletin
4021398. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the ISC, ISCe, QSC8.3, ISL, ISLe3, ISLe4
and QSL9 Engines Troubleshooting and Repair Manual, Bulletin 4021418.
Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the ISC and ISL CM2150 Service Manual,
Bulletin 4021569. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the ISB CM2100 and CM2150 Service
Manual, Bulletin 4021578. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the ISBe and ISDe CM2150 Service
Manual, Bulletin 4021597. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the ISLe CM2150 Service Manual, Bulletin
4021630. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the ISL G CM2180 Service Manual,
Bulletin 4021649. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the ISF3.8 CM2220, ISF3.8 CM2220 AN
and ISF3.8 CM2220 IAN Service Manual, Bulletin 4021704. Refer to
Procedure 002-004 in Section 2.
• Use the following procedure in the ISF2.8 CM2220, ISF2.8 CM2220 E,
ISF2.8 CM2220 AN and ISF2.8 CM2220 IAN Service Manual, Bulletin
4022178. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the ISB4.5, ISB6.7, ISD4.5 and ISD6.7
CM2150 SN Service Manual, Bulletin 4022188. Refer to Procedure
002-004 in Section 2.
• Use the following procedure in the ISB6.7 Service Manual, Bulletin
4022254. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the ISB6.7 CM2350 B101 Service Manual,
Bulletin 2883567. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the ISB4.5 CM2350 B104 Service Manual,
Bulletin 4332646. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the ISB6.7 CM2350 B103 Service Manual,
Bulletin 4332641. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the QSB6.7 CM2350 B105 Service
Manual, Bulletin 4332778. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the QSL9 CM2350 L102 Service Manual,
Bulletin 4332796. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the ISF3.8 CM2220 F110 Service Manual,
Bulletin 4358480. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the ISL9 CM2350 L101 Service Manual,
Bulletin 4310787. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the QSL9 M CM2250 L106 Service
Manual, Bulletin 4358343. Refer to Procedure 002-004 in Section 2.
• Use the following procedure in the QSB6.7 CM2350 B112 Service
Manual, Bulletin 4358498. Refer to Procedure 002-004 in Section 12.