Service Manual

ISB, ISBe and QSB (Common Rail [...] Flexplate
Section 16 - Mounting Adaptations - Group 16 Page 16-13
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Install
Install the support bracket and mounting capscrews.
Torque Value: 77 N•m [ 57 ft-lb ]
NOTE: Make sure to install any shims or spacers in the
same location as removed.
Lower the rear of the engine.
Install the rear engine mount fasteners.
Tighten to the original equipment manufacturer's
specifications.
Remove the lifting fixture or hoist from the rear of the
engine.
Flexplate (016-004)
Preparatory Steps
WARNING
Batteries can emit explosive gases. To reduce the
possibility of personal injury, always ventilate the
compartment before servicing the batteries. To
reduce the possibility of arcing, remove the negative
(-) battery cable first and attach the negative (-)
battery cable last.
WARNING
This component or assembly weighs greater than 23
kg [50 lb]. To prevent serious personal injury, be sure
to have assistance or use appropriate lifting
equipment to lift this component or assembly.
• Disconnect the batteries. Refer to Procedure 013-009
(Battery Cables and Connections) in Section 13.
• Remove the transmission and related components.
Refer to the OEM service manual.