Service Manual

Flywheel ISB, ISBe and QSB (Common Rail [...]
Page 16-22 Section 16 - Mounting Adaptations - Group 16
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Clean and Inspect for Reuse
WARNING
When using a steam cleaner, wear safety glasses or a
face shield, as well as protective clothing. Hot steam
can cause serious personal injury.
WARNING
When using solvents, acids, or alkaline materials for
cleaning, follow the manufacturer's recommendations
for use. Wear goggles and protective clothing to
reduce the possibility of personal injury.
WARNING
Some solvents are flammable and toxic. Read the
manufacturer's instructions before using.
WARNING
Compressed air used for cleaning should not exceed
207 kPa[30 psi]. Wear appropriate eye and face
protection when using compressed air. Flying debris
and dirt can cause personal injury.
If the pilot bearing was removed, use a wire brush to
clean the crankshaft pilot bore.
Use steam or solvent to clean the flywheel.
Dry with compressed air.
Inspect for nicks or burrs.
Use Scotch-Brite™ 7448 abrasive pad, or equivalent, to
remove small nicks and burrs.
WARNING
Do not use a cracked or resurfaced flywheel. These
can break, causing serious personal injury or
property damage.
Use the crack detection kit, Part Number 3375432, to
check for cracks in the flywheel. Follow the instructions
provided with the kit.