Service Manual

Flywheel Housing ISB, ISBe and QSB (Common Rail [...]
Page 16-32 Section 16 - Mounting Adaptations - Group 16
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Remove the rear support capscrews and bracket.
WARNING
This component weighs 23 kg [50 lb] or more. To
reduce the possibility of personal injury, use a hoist
or get assistance to lift this component.
Loosen the flywheel housing capscrews, but do not
remove.
Using a rubber hammer, loosen the flywheel housing so
that the seal is broken between the flywheel housing and
rear gear housing.
While supporting the flywheel housing, remove the
mounting capscrews and the flywheel housing.
Note the location of the flywheel housing capscrews as
removed. Some of the capscrews are different length/size
fasteners and must be installed in the same location as
removed.
WARNING
This component weighs 23 kg [50 lb] or more. To
reduce the possibility of personal injury, use a hoist
or get assistance to lift this component.
While supporting the flywheel housing, remove the
mounting capscrews.