Service Manual

Flywheel Housing ISB, ISBe and QSB (Common Rail [...]
Page 16-34 Section 16 - Mounting Adaptations - Group 16
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Clean and Inspect for Reuse
WARNING
When using a steam cleaner, wear safety glasses or a
face shield, as well as protective clothing. Hot steam
can cause serious personal injury.
WARNING
When using solvents, acids, or alkaline materials for
cleaning, follow the manufacturer's recommendations
for use. Wear goggles and protective clothing to
reduce the possibility of personal injury.
WARNING
Compressed air used for cleaning should not exceed
207 kPa[30 psi]. Use only with protective clothing, as
well as goggles/shield, and gloves to reduce the
possibility of personal injury.
WARNING
Wear appropriate eye and face protection when using
compressed air. Flying debris and dirt can cause
personal injury.
Use steam or solvent to clean the flywheel housing.
Dry with compressed air.
Inspect the flywheel housing for cracks, especially in the
area of the flywheel housing that mounts to the cylinder
block or rear gear housing.
Inspect the flywheel housing transmission/drive unit
mounting surface for cracks.
Also inspect for damaged threads commonly caused by
cross-threaded capscrews or installing an incorrect
capscrew.
NOTE: Helicoils are available to repair damaged threads.