Service Manual

Service Tools ISB, ISBe and QSB (Common Rail [...]
Page 6-2 Section 6 - Injectors and Fuel Lines - Group 06
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Tool No. Tool Description Tool Illustration
3822510
Injector Bore Brush
Used to clean the injector bore.
3823024
Injector Puller
Used to pull the injector.
3164025
Fuel Connector Remover
Used to pull the fuel connector.
3164044
Fuel Pressure Gauge Adapter
Used to measure fuel pressure and detect air in the fuel system. Use
with tool, Part Number 3164491.
3164491
Pressure/Vacuum Module
Used to measure fuel pressure and restriction. Use with digital
multimeter, Part Number 3164488 or 3164489.
3164488 or
3164489
Digital Multimeter
Used to measure electrical circuits: Voltage (volts), resistance
(ohms), and current (amps). 3164488 — Standard meter. 3164489
— Automotive meter with built in temperature adapter and
tachometer.
3824510
Quick Dry (QD) Cleaner
Used to clean parts and tools safely.
3164621
Lift Pump Performance Test Orifice
This tool connects to the diagnostic fitting on the inlet to the fuel filter.
It is used to measure flow from the lift pump through an orifice
without the engine running. The tool consists of a 0.043-inch orifice,
Part Number 3045018, and a Compuchek® coupling, Part Number
3376859 (EGR engines only).