Service Manual

ISB, ISBe and QSB (Common Rail [...] Cylinder Block - Group 01
Section V - Specifications Page V-25
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Component or Assembly (Procedure)
Ref.No./
Steps
Metric U.S.
.
Connecting Rod (001-014)
Connecting Rod Piston Pin Bushing
Diameter
40.019
mm
MIN 1.5756 in
40.042
mm
MAX 1.5765 in
Connecting Rod Crankshaft Bore Diameter
Bearings Removed
72.99 mm MIN 2.873 in
73.01 mm MAX 2.875 in
Standard 69.05 MIN 2.719
69.10 MAX 2.720
Oversize
0.25 mm [0.010 in] 68.80 MIN 2.709
68.85 MAX 2.711
0.50 mm [0.020 in] 68.55 MIN 2.699
68.60 MAX 2.701
0.75 mm [0.030 in] 68.30 MIN 2.689
68.35 MAX 2.691
1.00 mm [0.040 in] 68.05 MIN 2.680
68.10 MAX 2.681
Standard 68.962 MIN 2.7150
69.013 MAX 2.7170
Undersize
0.25 mm [0.010 in] 68.712 MIN 2.7052
68.763 MAX 2.7072
0.50 mm [0.020 in] 68.462 MIN 2.6954
68.513 MAX 2.6974
0.75 mm [0.030 in] 68.212 MIN 2.6855
68.263 MAX 2.6875
1.00 mm [0.040 in] 67.962 MIN 2.6767
68.013 MAX 2.6787
Connecting Rod to Crankshaft Bearing
Clearance
0.04 mm MIN 0.002 in
0.12 mm MAX 0.005 in
Crankshaft Front and Rear Oil Seal Wear
Groove
0.25 mm MAX 0.010 in