Service Manual

ISB, ISBe and QSB (Common Rail [...] Cylinder Block - Group 01 - Torque Values
Section V - Specifications Page V-31
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Component or Assembly (Procedure)
Ref.No./
Steps
Metric U.S.
.
Cylinder Block - Group 01 - Torque Values
Balancer (001-004)
Balancer Assembly Cover Capscrews 32 N•m [ 24 ft-lb ]
Balancer Installation Torque 48 N•m [ 35 ft-lb ]
Bearings, Connecting Rod (001-005)
Torque Value:
Step 1 30 N•m [ 22 ft-lb ]
Step 2 60 N•m [ 44 ft-lb ]
Step 3 Rotate 60 degrees.
Bearings, Main (001-006)
Main Bearing Capscrews. 50 N•m [ 37 ft-lb ]
Torque Value:
Step 1 50 N•m [ 37 ft-lb ]
Step 2 80 N•m [ 59 ft-lb ]
Step 3 Rotate 90 degrees.
Torque Value:
Previously Installed Main Bearing Capscrews
Step 1 60 N•m [ 44 ft-lb ]
Step 2 80 N•m [ 59 ft-lb ]
Step 3 Rotate 90 degrees.
Torque Value:
New Main Bearing Capscrews
Step 1 120 N•m [ 89 ft-lb ]
Step 2 Loosen completely
Step 3 60 N•m [ 44 ft-lb ]
Step 4 85 N•m [ 63 ft-lb ]
Step 5 Rotate 120 degrees.
Camshaft (001-008)
10 N•m [ 89 in-lb ]