Service Manual

ISB, ISBe and QSB (Common Rail [...] Cylinder Block - Group 01
Section V - Specifications Page V-33
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
Component or Assembly (Procedure)
Ref.No./
Steps
Metric U.S.
.
50 N•m [ 37 ft-lb ]
Torque Value:
Step 1 50 N•m [ 37 ft-lb ]
Step 2 80 N•m [ 59 ft-lb ]
Step 3 Turn all capscrews through 90 degrees.
Torque Value:
Previously Installed Main Bearing Capscrews
Step 1 50 N•m [ 37 ft-lb ]
Step 2 60 N•m [ 44 ft-lb ]
Step 3 80 N•m [ 59 ft-lb ]
Step 4 Rotate 90 degrees.
Torque Value:
New Main Bearing Capscrews
Step 1 120 N•m [ 89 ft-lb ]
Step 2 Loosen completely
Step 3 60 N•m [ 44 ft-lb ]
Step 4 85 N•m [ 63 ft-lb ]
Step 5 Rotate 120 degrees.
Crankshaft Seal, Front (001-023)
Crankshaft Seal Replacer Capscrews 33 N•m [ 45 ft-lb ]
Front Cover Capscrews. 24 N•m [ 18 ft-lb ]
Crankshaft Seal, Rear (001-024)
Crankshaft Seal Replacer Capscrews 45 N•m [ 33 ft-lb ]
Crankshaft Wear Sleeve, Front (001-025)
Wear Sleeve Capscrew 20 N•m [ 15 ft-lb ]
176 N•m [ 130 ft-lb ]