Service Manual

General Engine ISB, ISBe and QSB (Common Rail [...]
Page V-96 Section V - Specifications
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com
General Engine
Specifications
Automotive and Industrial
Listed below are the general specifications for the engines covered by this manual.
Horsepower................................................................................................................................Refer to engine dataplate
Bore and Stroke
for 3.9 liters [238 C.I.D] and 5.9 liters [360 C.I.D] Engines..................................102 mm [4.02 in] X 120 mm [4.72 in]
for 4.5 liters [275 C.I.D] and 6.7 liters [409 C.I.D] Engines..................................107 mm [4.21 in] X 124 mm [4.88 in]
Displacement (four-cylinder engine)............................................................3.9 liters [238 C.I.D] and 4.5 liters [275 C.I.D]
Displacement (six-cylinder engine).............................................................5.9 liters [360 C.I.D] and 6.7 liters [409 C.I.D]
Firing Order (four-cylinder engine)..........................................................................................................................1-3-4-2
Firing Order (six-cylinder engine)......................................................................................................................1-5-3-6-2-4
Approximate Engine Weight (with standard accessories):
Without EGR
Dry Weight for 3.9 Liters [238 C.I.D.]................................................................................................370 kg [816 lb]
Dry Weight for 5.9 Liters [360 C.I.D.]..............................................................................................470 kg [1036 lb]
Dry Weight for 4.5 Liters [275 C.I.D.]................................................................................................375 kg [827 lb]
Dry Weight for 6.7 Liters [409 C.I.D.]..............................................................................................475 kg [1047 lb]
Approximate Engine Weight (with standard accessories):
With EGR
Dry Weight for 5.9 Liters [360 C.I.D.]..............................................................................................519 kg [1144 lb]
Crankshaft Rotation (viewed from the front of the engine)............................................................................... Clockwise
Valve Clearance:
Intake.............................................................................................................................................0.254 mm [0.010 in]
Exhaust..........................................................................................................................................0.508 mm [0.020 in]
Maximum Overspeed Capability (15 seconds maximum)...................................................................................4200 rpm
Minimum Ambient Air Temperature for Unaided Cold Start.........................................................................-12.2°C [10°F]
Minimum Engine Cranking Speed.........................................................................................................................150 rpm
Engine Idle Speed......................................................................................................Minimum 600 to maximum 800 rpm
Altitude Maximum Before Derate Occurs
for engines 3.9 liters and 5.9 liters Engines without EGR...................................................................2000 m [6562 ft]
for engines 3.9 liters and 5.9 liters Engines with EGR......................................................................3658 m [12000 ft]
for engines 4.5 liters and 6.7 liters Engines without EGR.................................................................3048 m [10000 ft]
Oil Carryover:
Open-crankcase ventilation system..................................................................Less than 2 grams/hour [0.07 oz/hour]
Engine Blowby:
New.....................................................................................................................................................1 kPa [4 in H
2
O]
Used.............................................................................................................................................2.49 kPa [10 in H
2
O]
NOTE: The engine features a no-adjust overhead. The valve train is designed such that adjustment of the valve lash
is not required for normal service until the first overhead set adjustment recommended under the Maintenance
Schedule in Section 2 of this manual. The valve train operates acceptably within the limits of 0.152- to 0.381-mm
[0.006- to 0.015-in] intake valve lash and 0.381- to 0.762-mm [0.015- to 0.030-in] exhaust valve lash.
Marine Applications
Listed below are the general specifications for this engine.
Horsepower................................................................................................................................Refer to engine dataplate
Compression Ratio...................................................................................................................................................17.2:1
Firing Order.......................................................................................................................................................1-5-3-6-2-4
Crankshaft Rotation (viewed from the front of the engine)............................................................................... Clockwise
Displacement.....................................................................................................................................5.9 liters [360 C.I.D.]
Bore and Stroke........................................................................................................102 mm [4.02 in] X 120 mm [4.72 in]
Dry Weight, Engine with Heat Exchanger System - Average....................................................................612 kg [1350 lb]
Overhead Adjustment
Intake Valve...................................................................................................................................0.254 mm [0.010 in]
Exhaust Valve................................................................................................................................0.508 mm [0.020 in]
Maximum Overspeed Capability..........................................................................................................................4200 rpm
Minimum Engine Cranking Speed.........................................................................................................................150 rpm
Engine Idle Speed Minimum..................................................................................................................................600 rpm