User`s guide

Record Pull-Down

The Record Pull-Down will show all records saved for that

vehicle. Remember that, once ActiveSync’ed, these records are

archived to the PC. Once the desired vehicle is selected from

the Equipment Pull-Down, use the Record Pull-Down to load the

desired record, identified by date and time. The dataplate

associated with that vehicle and the fault information associated

with that record can then be reviewed. Monitor parameters and

the subsystem dataplate are not stored and are displayed as

Unavailable. This is due to the fact that the record is a single

sample, which is typically not useful for analysis.

Open File

Configurator subsystem files can be

accessed without leaving the

UICK

HECK

CE application. Using

the File menu item, and selecting Open

File Records will display the

Configurator .subsystem files.

Deleting Records

Records can be deleted by utilizing the File menu item and

selecting ‘Delete Record’ (which is only available in Review

mode). This will erase the current record from memory. Once

erased, this record can be neither viewed nor transferred to the

PC during an ActiveSync process. Note that deleting records on

your handheld does not affect files already stored on your PC.

Deleting Equipment

An equipment category and all its associated records can be

deleted by utilizing the File menu item and selecting ‘Delete

Equipment’ menu. This will erase the current equipment record