Operation and maintenance manual

QSB4.5 and QSB6.7 Alternator
Section A - Adjustment, Repair, and Replacement Page A-7
Pad Mount
• Remove the alternator mounting capscrews.
• Remove the alternator.
Hinge Mount
• Remove the alternator link capscrew.
Remove the alternator mounting capscrew.
Remove the alternator.
Install
Spool Mount
• Install the alternator and the bottom alternator
mounting capscrew and nut.
• Tighten the capscrews.
Torque Value:
Lower Mounting Capscrew
Step 1 40 N•m [ 30 ft-lb ]
Torque Value:
Upper Link Mounting Capscrew
Step 1 24 N•m [ 212 in-lb ]