Operation and maintenance manual

All Engines United States And Canada Industrial (Off-Hi [...] QSB4.5 and QSB6.7
Page W-2 Section W - Warranty
Owner is responsible for the cost of lubricating oil, antifreeze, filter elements and other maintenance items replaced
during repair of a Warrantable Failure.
During The Base Engine And Extended Major Components Warranties
Owner is responsible for the operation and maintenance of the Engine as specified in the applicable Cummins
Operation and Maintenance Manual. Owner is also responsible for providing proof that all recommended maintenance
has been performed.
Before the expiration of the applicable Warranty, Owner must notify a Cummins distributor, authorized dealer or other
repair location approved by Cummins of any Warrantable Failure and make the Engine available for repair by such
facility. Service locations are listed on the Cummins Worldwide Service Locator at cummins.com.
Owner is responsible for communication expenses, meals, lodging and similar costs incurred as a result of a
Warrantable Failure.
Owner is responsible for non-Engine repairs, "downtime" expenses, cargo damage, fines, all applicable taxes, all
business costs and other losses resulting from a Warrantable Failure.
Limitations
Engines with an emissions certification listed below must be operated using only diesel fuel having no more than the
corresponding maximum sulfur content. Failure to use the specified fuel as listed in the Cummins Fuel Bulletin
#3379001 Table 1 (Cummins Inc. Required Diesel Fuel Specifications) can damage the Engine and aftertreatment
system within a short period of time. This damage could cause the Engine to become inoperable and failures
attributable to the use of incorrect fuels will be denied Warranty Coverage. Fuel specifications also need to comply
with local fuel regulations (EN590 for Europe and ASTM D975 for North America) for Warranty eligibility.
Maximum sulfur levels by emissions certification
level as listed on the Engine's dataplate are:
EPA 2007/2010/2013 max. 15 parts per million
EPA Tier 4 Interim / Final max. 15 parts per million
EU Stage IIIB 2011 max. 15 parts per million
Euro 4/5 max. 50 parts per million
Euro 6 max. 10 parts per million
Cummins is not responsible for failures or damage resulting from what Cummins determines to be abuse or neglect,
including, but not limited to: operation without adequate coolants or lubricants; overfueling; overspeeding; lack of
maintenance of lubricating, cooling or intake systems; improper storage, starting, warm-up, run-in or shutdown
practices; unauthorized modifications of the Engine. Cummins is also not responsible for failures caused by incorrect
oil, fuel or diesel exhaust fluid or by water, dirt or other contaminants in the fuel, oil or diesel exhaust fluid.
For power units and fire pumps (package units), this Warranty applies to accessories, except for clutches and filters,
supplied by Cummins which bear the name of another company.
For all other Industrial engines (except those previously mentioned), this Warranty does not apply to accessories
which bear the name of another company. Such non-warranted accessories include, but are not limited to: alternators,
starters, fans**, air conditioning compressors, clutches, filters, transmissions, torque converters, steering pumps, and
non-Cummins fan drives, Engine compression brakes and air compressors.
Cummins Compusave units are covered by a separate Warranty.
Before a claim for excessive oil consumption will be considered, Owner must submit adequate documentation to show
that consumption exceeds Cummins published standards.
Failures of belts and hoses supplied by Cummins are not covered beyond the first 500 hours or one year of operation,
whichever occurs first.
Parts used to repair a Warrantable Failure may be new Cummins parts, Cummins approved rebuilt parts or repaired
parts. Cummins is not responsible for failures resulting from the use of parts not approved by Cummins.
A new Cummins or Cummins approved rebuilt part used to repair a Warrantable Failure assumes the identity of the
part it replaced and is entitled to the remaining Coverage hereunder.
For all A Series Applications, including Industrial, travel reimbursement for non-transportable equipment will be limited
to 4.0 hours, $0.25/mile and 250 miles maximum. Any costs beyond this limit are the customer's responsibility.
CUMMINS DOES NOT COVER WEAR OR WEAROUT OF COVERED PARTS.
CUMMINS IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
THESE WARRANTIES SET FORTH HEREIN ARE THE SOLE WARRANTIES MADE BY CUMMINS IN REGARD
TO THESE ENGINES. CUMMINS MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, OR OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.