Owners manual

QSB4.5 and QSB6.7 General Safety Instructions
Section i - Introduction Page i-3
General Safety Instructions
Important Safety Notice
WARNING
Improper practices, carelessness, or ignoring the warnings can cause burns, cuts, mutilation, asphyxiation or
other personal injury or death.
Read and understand all of the safety precautions and warnings before performing any repair. This list contains the
general safety precautions that must be followed to provide personal safety. Special safety precautions are included
in the procedures when they apply.
• Work in an area surrounding the product that is dry, well lit, ventilated, free from clutter, loose tools, parts, ignition
sources and hazardous substances. Be aware of hazardous conditions that can exist.
• Always wear protective glasses and protective shoes when working.
• Rotating parts can cause cuts, mutilation or strangulation.
• Do not wear loose-fitting or torn clothing. Remove all jewelry when working.
• Disconnect the battery (negative [-] cable first) and discharge any capacitors before beginning any repair work.
Disconnect the air starting motor if equipped to prevent accidental engine starting. Put a "Do Not Operate" tag in
the operator's compartment or on the controls.
• Use ONLY the proper engine barring techniques for manually rotating the engine. Do not attempt to rotate the
crankshaft by pulling or prying on the fan. This practice can cause serious personal injury, property damage, or
damage to the fan blade(s) causing premature fan failure.
• If an engine has been operating and the coolant is hot, allow the engine to cool before slowly loosening the filler
cap to relieve the pressure from the cooling system.