Owners manual

QSB4.5 and QSB6.7 All Engines United States And Canada Industrial (Off-Hi [...]
Section W - Warranty Page W-5
Failures of belts and hoses supplied by Cummins are not covered beyond the first 500 hours or one year of operation,
whichever occurs first.
Parts used to repair a Warrantable Failure may be new Cummins parts, Cummins approved rebuilt parts or repaired
parts. Cummins is not responsible for failures resulting from the use of parts not approved by Cummins.
A new Cummins or Cummins approved rebuilt part used to repair a Warrantable Failure assumes the identity of the
part it replaced and is entitled to the remaining Coverage hereunder.
For all A Series Applications, including Industrial, travel reimbursement for non-transportable equipment will be limited
to 4.0 hours, $0.25/mile and 250 miles maximum. Any costs beyond this limit are the customer's responsibility.
CUMMINS DOES NOT COVER WEAR OR WEAROUT OF COVERED PARTS.
CUMMINS IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
THESE WARRANTIES SET FORTH HEREIN ARE THE SOLE WARRANTIES MADE BY CUMMINS IN REGARD
TO THESE ENGINES. CUMMINS MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, OR OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Emission Warranty
Products Warranted
This Emission Warranty applies to new Engines marketed by Cummins that are used in the United States* and
Canada in vehicles designed for Industrial Off-Highway use. This Warranty applies to Engines delivered to the ultimate
purchaser on or after April 1, 1999 for Engines up to 750 horsepower and on or after January 1, 2000 for Engines 751
horsepower and over.
Coverage
Cummins warrants to the ultimate purchaser and each subsequent purchaser that the Engine is designed, built and
equipped so as to conform at the time of sale by Cummins with all U.S. Federal emission regulations applicable at the