Owners manual

All Engines International Industrial (Off-Highway) QSB4.5 and QSB6.7
Page W-8 Section W - Warranty
All Engines International Industrial (Off-Highway)
Coverage
Products Warranted
This Warranty applies to new Engines sold by Cummins and delivered to the first user on or after April 1, 1999, that
are used in Industrial (Off-Highway) applications anywhere in the world where Cummins approved service is available,
except the United States and Canada. Different Warranty Coverage is provided for Engines used in marine, generator
drive and certain defense applications.
Base Engine Warranty
This Warranty covers any failures of the Engine, under normal use and service, which result from a defect in material
or factory workmanship (Warrantable Failure).
Coverage begins with the sale of the Engine by Cummins. Coverage continues for two years or 2,000 hours of
operation, whichever occurs first, from the date of delivery of the Engine to the first user, or from the date the unit is
first leased, rented or loaned, or when the Engine has been operated for 50 hours, whichever occurs first. If the 2,000
hour limit is exceeded during the first year, Coverage continues until the end of the first year.
Engine aftertreatment components included in the Cummins Critical Parts List (CPL) and marked with a Cummins part
number are covered under Base Engine Warranty.
Extended Major Components Warranty
The Extended Major Components Warranty covers Warrantable Failures of the Engine cylinder block, camshaft,
crankshaft and connecting rods (Covered Parts).
Bushing and bearing failures are not covered.
This Coverage begins with the expiration of the Base Engine Warranty and ends three years or 10,000 hours (3,000
hours for A Series Engines) hours of operation, from the date of delivery of the Engine to the first user, or from the
date the unit is first leased, rented or loaned, or when the Engine has been operated for 50 hours, whichever occurs
first.