User Guide

Installation
For detailed installation steps, please refer to another file we provided
‘How to install a car stereo’
Generally speaking, there are only two sizes of car slots for installing products
1. Double din size is about 7inch x 4 inch (178x102 mm).
2. Single din size is about 7inch x 2 inch (178x51mm).
Our monitor is suitable for standard double Din slots size 178mm x 102mm (7inch x
4inch)
NOTE: Car stereo can not be used in cars with a voltage exceeding 14.4V, such as
large trucks (usually 24V), otherwise it will damage the car stereo.
 installation tips:
(1) If the installation need to drilling or other modifications to the vehicle,
preparations should be made in advance.
(2) Before installing the product, you can test the product to see if all functions are
normal (the black wire is grounded, the red wire and the yellow wire are connected
to the 12V power supply, and the product can be started)
(3) When connecting wires, make sure that the connected wires are bundled with
insulating tape, including the USB interface, and no wires are allowed to remain
exposed.
(4) To prevent short circuits, wrap the disconnected wires with insulating tape. It is