Installation Instructions

Installation Guide
6
Technical Data
SKU DESCRIPTION ARTICLE NO
Operating Control
E486320
93141337 Daintree Wireless Controls Wall Dimmer, In Wall, 2 Button, Battery WWD2-2IW
Product Specifications
Product Certifications
Product Availablity
Daintree® Wireless Controls
Wireless Wall Dimmer (WWD2-2IW)
Dimensions
Weight
Power Supply
Battery Life
Operating Environment
Status Indicator
Mounting
Warranty
Purpose of Control
Construction of Control
Type 1 Action
Pollution Degree 2
114mm H x 70mm W x 36mm D
130g
(4) AAA 1.5V battery
5 years (normal operation)
-10°C to 40°C (Indoor Use Only)
Network join status, button triggered
Mounts into junction box
5 years
Operating Control
Independently Mounted
FCC ID: 2AS3F-WWD2IW
IC: 25008-WWD2IW
The alkaline batteries supplied with your wireless switch are prone to leak over their lifetime, particularly when the battery is mostly
depleted. In the event that your battery leaks alkaline into the battery compartment, the chemicals can damage the metal terminals.
The chances of this happening can be reduced by changing the batteries in the switch promptly when the batteries are nearing their
end of their useful life. If a battery leak should occur, however, it should be cleaned up to prevent damage to the wireless switch.
WARNING: THE CHEMICALS LEAKED FROM ALKALINE BATTERIES ARE CORROSIVE. WHEN HANDLING LEAKING BATTERIES, PROPER
PERSONAL SAFETY EQUIPMENT SHOULD BE USED, INCLUDING RUBBER GLOVES AND EYE PROTECTION.

If it is discovered that the batteries have leaked, wearing rubber gloves and using eye protection, remove all of the batteries from the
battery compartment and seal them in a plastic bag. The bag should be discarded in a manner in accordance with local laws and
regulations. Then, using a small cloth lightly moistened with vinegar or other mild acid, carefully wipe all of the leaked battery
chemicals from inside the battery compartment and allow it to dry. Once dry, the batteries may be replaced and the switch may be
reinstalled.