User's Guide

10 11
Change the Close Position
2. Set the Close Position
3. Exit Mode
Pull down on the TAU once to exit
learn mode. The drapery will jog to

1. Enter Learn Mode
Pull down and release the TAU so the
drapery moves towards the direction
you would like to set as the “close”
position. After the drapery reaches
the position, it will stop moving.
       
seconds, or until the drapery jogs.
Release the TAU.
Fig. X
Fig. X
Note: If you have a remote control
paired to the device, you can use it to
move the curtain into the desired full
close position. A press and release
will move the curtain half an inch in a
direction while a press and hold will
move the curtain continuously.
By hand, pull the curtain until it
reaches the desired full close position.
Fig. X
Change the open Position for the Room Side
curtain (Motor 1)
2. Set the Open Position
By hand, pull the curtain until it
reaches the desired full open position.
3. Exit Mode
Pull down and release the TAU once to
exit learn mode. The drapery will jog

1. Enter Learn Mode
Pull down and release the TAU so the
room side drapery moves towards the
direction you would like to set as the
“open” position. After the drapery
reaches the position, it will stop
moving. Pull down and hold the TAU
     
jogs.
Release the TAU.
Change the Close Position for the room side
curtain
1. Enter Learn Mode
Pull down and release the TAU so the
drapery moves towards the direction
you would like to set as the “close”
position. After the drapery reaches
the position, it will stop moving.
       
seconds, or until the drapery jogs.
Release the TAU.
Fig. X
Fig. X
Fig. X
Fig. X
Fig. X
Change Positions on the drapery Track
(dual)
Fig. X
Fig. X