User's Guide

28 29
Using the DRapery Track
Using the TAU for Operation
The TAU, or Tug Activation Unit, can be pulled down or pushed up, depending
on the desired movement.
On a single drapery, pulling the TAU down activates the curtain. Pulling
down once makes the curtain move towards the next position, depending on
if the curtain is open or closed. Pushing the TAU up will stop it. Pulling down
a second time after stopping will allow the curtain to move in the opposite
direction.
On a dual drapery, pulling the TAU down activates the curtain plugged into
the motor 1 slot. Pulling down once makes the curtain move towards the
next position, depending on if the curtain is open or closed. Pulling down a
second time will stop it. Pulling down a third time, shortly after stopping will
allow the curtain to move in the same direction as before. Pulling down after
several seconds will change the direction the curtain moves.
Pushing up on the TAU will activate the curtain plugged into the motor 2
slot. Pushing up once makes the curtain move towards the next position,
depending on if the drapery is open or closed. Pushing up a second time will
stop it. Pushing up a third time, shortly after stopping will allow the curtain
to move in the same direction as before. Pulling down after several seconds
will change the direction the curtain moves.
Using Smart Assist
Smart Assist is a drapery track feature to allow users the ability to begin
an open or close movement manually, and have the drapery automatically
complete the movement.
To trigger Smart Assist, simply pull the curtain approximately one foot
towards the direction you would like to move the curtain. Upon release, the
curtain will continue moving in that direction until it reaches the full open or
closed position.
Using the Remote Control- Single Drapery
Channel
Selector
LED
Indicators
66%
closed
Full
Closed
66% Open
Full open
Full Open- A press and release moves the drapery to the full open position.
A press and hold will move the drapery towards the open position, and stop
it precisely upon release.
Full Closed- A press and release moves the drapery to the full closed position.
A press and hold will move the drapery towards the closed position, and stop
it precisely upon release.
66% Open- A press and release moves the drapery to the approximately
66% open position.
66% Closed- A press and release moves the drapery to the approximately
66% closed position.
Channel Selector- Successive presses and releases will change the remote

LED Indicators- Indicator lights for various remote functions.