User's Guide

16 17
Switch the “Open” and “close” Positions
1. Set the Drapery Position
Move the drapery in the position you
would like to be recognized as “open”.
Fig. X
2. Learn the Position
Press and hold all three buttons on


Fig. X
Grouping Multiple Drapery Together

On a central unit you would like to
designate as the ‘Master’, press and
hold the light sensor button on the


been successfully grouped.
1. Enter Pairing Mode
On each drapery you would like to
group, pull down on the TAU twice.

move. The second pull should stop it.
Fig. X
Fig. X
Change the Frequency
2. Enter Frequency Change
Mode on the Remote
Press a tack or pen through the hole
in the back of the remote to depress
the Program button (Fig. x). Press this
button three times to enter frequency
change mode. The LEDs will illuminate
to a representation of the current
frequency (Fig. x).
In rare instances it may become necessary to alter the frequency on which
the device communicates. The frequency will need to be changed on both
the unit and the remote. To do this, you must have the bridge and the multi-
channel remote.
In most instances, when the frequency of the device needs to be changed, the
user will recieve an alert through the Smart Phone app.
Fig. X
Fig. X
3. Change the Frequency
Use the full close and full open buttons
on the remote to move the frequency
up and down (Fig. X).
1. Enter Frequency Change
Mode through the app
Make sure the bridge is connected and
the Smart Phone application has been
downloaded.
Fig. X
Hit the gear icon to go to your device
and app settings, then go to Frequency
Settings.
    
       
frequency for your device.
Fig. X