Owner`s manual

71
Final Check
After all adjustments have been made, shift through •
every gear several times at varying speeds. This will
ensure all your adjustments are correct and will allow
you to pinpoint any trouble areas. If you encounter any
problems, refer to the appropriate section and make any
necessary adjustments.
Check the tire pressure and inflate each tube to the •
recommended psi as stated on the sidewall of the tire.
Check that the kickstand operates smoothly and the •
kickstand bolt is secured tightly.
Finally, examine the bicycle. Make sure all accessories •
are attached and all quick releases, nuts and bolts have
been tightened securely.
Correct maintenance of your bicycle will ensure many •
years of happy riding. Service your bicycle regularly by
referring to the relevant sections of this manual, OR
take it to a professional bicycle shop.
Remember: Always wear a helmet and obey all traffic •
laws.
Never inflate a tire beyond the maximum
pressure marked on the tire’s sidewall.
Exceeding the recommended pressure
may blow the tire off the rim, which
could cause damage to the bicycle and
injury to the rider and bystanders.
Tighten both rear wheel axle nuts or the
quick release mechanism securely. Fail-
ure to do this may cause the rear wheel
to dislodge from the frame dropouts
resulting in serious damage or injury.
!
!