Owner`s manual

Attaching Training Wheel Brace to Bicycle

There are two different braces used to attach the training

wheels to the bicycle: the C-Shape Brace and the Flat Brace.

Determine which brace was included with your bicycle and

follow the given instructions for that particular brace.

C-Shape Brace

Remove the axle nut and washer from the rear wheel axle.

Place the brace stabilizer washer onto the axle and align the

washer so that the notch on the washer fits into the rear frame

drop out. Next, place the C-shaped wheel brace onto the axle

and replace the washer and axle nut. Tighten the axle nut

securely, making sure that the wheel brace stays in the proper

vertical position. The elongated hole on the wheel brace allows

the training wheel height to be adjusted for proper fit.

Flat Brace

Remove the axle nut and washer from the rear wheel axle.

Place the flat wheel brace onto the axle. Next place the brace

stabilizer washer onto the axle and align it so that the notch

fits into the rear frame drop out. Replace the washer and axle

nut. Tighten the axle nut securely, making sure that the wheel

brace stays in the proper vertical position. The elongated hole

on the wheel brace allows the training wheel height to be

adjusted for proper fit.

C-Shape

Flat