Instruction manual
14
Cleaning
Defrosting
Frost might build up in the freezer compartment after the unit has been used for a period of 
time. Scrape away the frost using a plastic scraper.
Do not use a metal or sharp instrument to scrap away the frost, nor should you use any 
electrical appliances to aid defrosting.
We recommend that defrosting should be carried out when the frost layer builds up to 3cm 
(~1.18”). Choose a time when the stock of frozen food is low, follow these procedures:
1.  Take out the food, turn the unit off at the mains supply and leave the door open. Ideally, the 
frozen food should be put into another freezer. If this is not possible, wrap the food in several 
sheets of newspaper or large towels and then a thick rug or blanket to keep it cool.
2.  Place a shallow bowl or pan below the freezer compartment. Scrap 
away the frost using the plastic scraper. Defrosting the remaining frost 
can be speeded up by placing a bowl of hot water inside the freezer 
compartment cabinet and closing the door. As the solid frost loosens, 
scrap it away with the plastic scraper and remove.
3.  When defrosting is complete, clean your unit’s interior and exterior.
Cleaning the Interior and the Exterior of the Unit
• Remove all the shelves, drawers and salad bin before cleaning. To remove the salad bin first 
remove the lower fridge door shelf.
• Wipe the inside of the unit with a weak solution of bicarbonate soda and then rinse with 
warm water using a ‘wrung-out’ sponge or cloth. Wipe completely dry before replacing the 
shelves, drawers and salad bin.
• Use a damp cloth to clean the exterior, and then wipe with a standard furniture polish. Make 
sure that the doors are closed to avoid the polish getting on the magnetic door seals or 
inside the fridge/freezer compartments.
• The grille of the condenser at the back of the unit and the adjacent components can be 
vacuumed using a soft brush attachment.
Cleaning Tips
Condensation may appear on the outside of the unit. This maybe due to a change in room 
temperature. Wipe off any moisture residue. If the problem continues, please contact a qualified 
technician for assistance.
C155CW10_IB_final110316.indd 14 16/03/2011 6:02 PM










