Specifications

25
To Connect the Gas Supply:
1. Connect the gas supply to the right gas inlet at the rear of the cooker. The gas hose must hang in a “U” behind
the cooker.
2. Undertake a full gas tightness test.
3. To avoid damage to the appliance gas rail inlet pipe tighten the ttings using two suitable spanners.
4. Using a suitable leak detection uid solution check each gas connection one at a time by brushing the
solution over the connection. The presence of bubbles will indicate a leak. If there is a leak, tighten the tting
and then recheck for leaks.
Do not use a naked ame to test for leaks.
CFSGWH_SV12_IB_120607_Annie.indd 25 12年6月7日 下午7:15