Product Manual

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS STRAIGHT LINE PULL: LBS. MAX. LINE PULL.
DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HITCH WEIGHT: LBS.
INSTALL TIME:
MINUTES
INSTALL NOTES:
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
5,000
500
26
20
9,000
31198 TOYOTA TUNDRA
PASSENGER SIDE
FRAME RAIL
DRIVER SIDE
FRAME RAIL
TOW HOOK
(BOTH SIDES)
EXISTING HARDWARE
(BOTH SIDES)
EXISTING FRAME
WELDNUTS
NO DRILLING REQUIRED
REMOVE TOW HOOKS
RE-INSTALL TOW HOOKS
1) Remove tow hooks from vehicle.
2) Raise hitch into position, Re-install tow hooks with original fasteners.
3) Torque all 12mm fasteners to 65 lb-ft.
2/22/07