Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
INSTALLATION IS NOW COMPLETE
3. Raise hitch into position and secure using M12 bolts removed
in Step (1) and 1/2" flange nuts. (Note: If necessary to get the
passenger side into position, loosen the exhaust hanger on the
passenger side to allow the exhaust bracket to move side to side.)
Torque all 1/2" hardware to 110 ft-lbs.
Torque all M12 hardware to 86 ft-lbs.
4. Hitch shown installed properly. (Re-tightened the exhaust hanger
on the passenger side if loosened in Step 3.)