Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
Parts List
DESCRIPTIONPART NUMBERQTYITEM
CARRIAGE BOLT1/2-13 x 1 1/241
HEX FLANGE NUTHFN 121342
.250 x 1.00 x 3.00" SQUARE HOLE SPACERCM-SP643
1/2" x 30" FISHWIRE1_2 x 30 FISHWIRE44
1. Remove (14) screws that secure plastic fascia to bottom of
vehicle. This will allow fascia to be pulled away from
exhaust, and allow heat shield to be removed.
Coupe models: Remove fasteners with a 7mm socket.
2. Lower exhaust by first removing (2) bolts on each side from
the end of the vehicle frame rails that secure the exhaust
hanger brackets. Remove brackets from hanger pegs on
muffler. Then remove the rubber exhaust hangers, (4)
places forward of mufflers (3) places on Coupe models.
1
2
3
4
EURO MOUNT
OPTION AVAILABLE
#45571 (1 7/8" BALL)
#45572 (2" BALL)
DESIGNED FOR USE WITH
BALLMOUNT #45022 (D-230)