Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
8. Fishwire 1/2" carriage bolts and spacer blocks up through
slots in vehicle frame and down through attaching holes in
hitch side plates, 2 places, each side.
9. Raise hitch and exhaust into position simultaneously, being
careful not to push bolts back into frame. Secure with 1/2"
flange hex nuts. Torque all 1/2" hardware to 110 lb-ft.
Follow Step 1 in reverse order to raise hitch back into position.
Reattach exhaust support strap if removed in Step 3.
10. Install complete.